Product Description

Oxygen-Free-Copper UNC C11000, UNS C10100

We are Stockholder & Distributors of Oxygen-Free Copper UNS C11000, Oxygen-Free Copper UNS C10100 in the form of Sheets, Plates, Strips, Rods, Bars, Wires etc.

Copper 11000 - Electrolytic Copper OFHC C10100 - Oxygen Free Copper

 

Applications for Copper 110 and Copper 101

WELDING FIXTURES

ANODES

BUS BAR IN ELECTRICAL POWER INSTALLATIONS

GROUND STRAPS

AUTOMOTIVE RECTIFIERS

CONDUCTORS

GLASS-TO-METAL SEALS

HIGH RESISTANCE-RATIO CRYOGENIC SHUNTS

LEAD-IN WIRE SEALS

TRANSISTOR COMPONENT BASES

BUS CONDUCTORS

WAVE GUIDES

HOLLOW CONDUCTORS

ANODES FOR VACUUM TUBES

MICROWAVE TUBES

 

Copper 11000 - Electrolytic Copper

Specifications (C11000)

ASME SB133                         ASTM B1 (Round Wire)        

ASTM B101                            ASTM B116       

ASTM B124                            ASTM B133       

ASTM B152                            ASTM B172       

ASTM B173                            ASTM B174       

ASTM B187                            ASTM B188       

ASTM B189                            ASTM B2  

ASTM B224                            ASTM B226       

ASTM B228                            ASTM B229       

ASTM B246                            ASTM B272       

ASTM B283                            ASTM B286       

ASTM B298                            ASTM B3  

ASTM B33                              ASTM B355       

ASTM B370                            ASTM B447       

ASTM B451                            ASTM B47

ASTM B470                            ASTM B48

ASTM B49                              ASTM B496       

ASTM B506                            ASTM B556       

ASTM B638                            ASTM B694       

ASTM B738                            ASTM B8  

ASTM F467 (Nuts)                 ASTM F468 (Nuts)      

MIL B-20292                          MIL C-12168      

MIL W-6712                            QQ B575   

SAE J461                                SAE J463  

UNS C11000

Copper C11000 is mainly used for plumbing fittings and some electrical components not requiring extensive machining.

Copper 11000 inherent fabrication qualities readily permit it to be bent, soldered, drilled, welded, and formed to fit almost any design specification.

The machinability rating of this alloy is 20. Soldering is rated as excellent, brazing is rated as good, spot welding is not recommended, seam welding is not recommended, and butt welding is rated as good.

 

 

Copper 10100 - Oxygen Free Copper

Specifications (C10100)

AMS 4700                               ASTM B1 (Round Wire)        

ASTM B111                            ASTM B133       

ASTM B152                            ASTM B172       

ASTM B173                            ASTM B174       

ASTM B187                            ASTM B188       

ASTM B189                            ASTM B2  

ASTM B224                            ASTM B246       

ASTM B272                            ASTM B280       

ASTM B286                            ASTM B298       

ASTM B3                                ASTM B33

ASTM B355                            ASTM B359       

ASTM B432                            ASTM B447       

ASTM B451                            ASTM B470       

ASTM B48                              ASTM B49

ASTM B496                            ASTM B640       

ASTM B641                            ASTM B698       

ASTM B75                              ASTM F68

MIL B-18907                          MIL W-3318       

MIL W-85                                QQ B575   

QQ B650                                 QQ W343  

UNS C1010

 

Copper C10100 is used for electrical and electronic conductors, wave guides, cavity resonators, super conductor matrixes, vacuum tube and solid-state devices, and glass to metal seals.

Copper, OFE, Oxygen Free Electronic. C10100 has conductivity 101% IACS, the highest among coppers.

The machinability rating of this alloy is 20. Soldering is rated as excellent, brazing is rated as good, spot welding is not recommended, seam welding is not recommended, and butt welding is rated as good.

 

Alloy Number	Chemical Composition	Hardness	Conductivity(%)	Tensile Strength
11000	Copper 99.99	B30-40	95-100	25-40 ksi
10100  Oxygen Free	Copper 99.99  Tellurium .001	B30-40	101	25-40 ksi

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2010 Add. 2011, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3, NADCAP Certified in accordance with SAE Aerospace Standards, RWMA Class (Resistance Welding Manufacturing Aliance)   


If you have any requirement of above items, please feel free to contact us     


Regards,     


CONTACT PERSON :     


MUKESH SHAH     
Director     
MOBILE No. 0091- 9820292499     
EMAIL - sales@rolexalloys.com

ROLEX ALLOYS INTERNATIONAL     
( High Nickel Alloy & Super Alloy Materials )     
57-A, KHATARGALLI,      
THAKURDWAR,      
MUMBAI - 400002, INDIA.      
TEL.No. 0091-22-23858802      
TEL.No. 0091-22-23823963      
FAX No. 0091-22-23898724      
email - sales@rolexalloys.com 
website : www.rolexalloys.com     

      

CHAIRMAN - chairman@rolexalloys.com      
DIRECTOR MANAGING - managingdirector@rolexalloys.com      
DIRECTOR TECHNICAL - technicaldirector@rolexalloys.com      
INTERNATIONAL SALES - salesinternational@rolexalloys.com      
DOMESTIC SALES - salesdomestic@rolexalloys.com      
INFORMATION GENERAL - info@rolexalloys.com      
GENERAL SALES - sales@rolexalloys.com      
SERVICE - service@rolexalloys.com     
RECRUITMENT - career@rolexalloys.com      
WEBMASTER - webmaster@rolexalloys.com